ACT zwart 3 meter LSZH U/FTP CAT6A datacenter slimline patchkabel met rasthaken-RJ45-stekkers

The ACT Black 3 meter LSZH U/FTP CAT6A patch cable is a slimline datacenter Ethernet cable with a 3.8 mm diameter, designed to reduce bundle thickness and improve airflow in network cabinets. It features U/FTP shielding to minimize electromagnetic interference, snagless RJ45 connectors with gold-plated contacts for reliable connections, and an LSZH jacket for low smoke and zero halogen emissions suitable for enclosed environments.

Advantages

The slim 3.8 mm diameter and reduced bending radius allow denser cable routing and better cabinet airflow compared with regular CAT6A patch cords. U/FTP shielding reduces crosstalk and external interference. LSZH outer material reduces hazardous emissions in case of fire. Snagless RJ45 connectors and gold-plated contacts ensure durable and stable data transmission.

Suitable for

• Data center patching and high-density rack installations
• High-speed Ethernet connections up to CAT6A performance
• Environments requiring low-smoke, zero-halogen cabling
• Short patch runs where smaller diameter cables improve airflow

Key specifications

• Standard: CAT6A U/FTP
• Cable length: 3 m
• Diameter: 3.8 mm (slimline)
• Connectors: RJ-45 to RJ-45, snagless
• Contacts: Gold-plated
• Jacket: LSZH (Low Smoke Zero Halogen)
• Shielding: U/FTP (overall unshielded with foiled pairs)
• Brand / MPN / EAN: ACT / DC7903 / 8716065442328

How to use

Connect one RJ45 connector to the network device and the other to the switch, patch panel or outlet. Route the slimline cable through the rack or cable management channels taking advantage of the reduced bending radius. For reliable performance, avoid sharp bends and protect connectors from mechanical strain. Use standard patching practices for labeling and securing cords in cabinets.

Recommendations

Although ISO/IEC and TIA standards typically reference 22–26 AWG patch cords, this slimline product uses thinner conductors (similar to 32 AWG) which increase attenuation, especially at higher frequencies. To accommodate this, limit the permanent link length compared with regular 24 AWG patch cords. For PoE deployments, ACT advises a maximum bundle size of 24 cables to prevent excessive temperature rise; ANSI TSB-184-A limits the center-cable temperature increase to less than 15°C above ambient.