BlueOptics SFPP-10GE-LR-IT-BO netwerk-transceivermodule 10000 Mbit/s SFP+ 1310 nm

The BlueOptics SFPP-10GE-LR-IT-BO is an SFP+ fiber optic transceiver module designed for 10GBASE-LR single-mode links. It supports a maximum data transfer rate of 10000 Mbit/s over single-mode fiber at a nominal wavelength of 1310 nm. Housed in a compact silver metal casing and weighing approximately 2 g, the module uses a standard SFP+ interface and operates from a 3.3 V supply, making it compatible with a wide range of network switches, routers and storage systems that accept SFP+ optics.

Advantages

The module follows MSA SFP+ mechanical and electrical standards and is manufactured to provide interoperability with major networking platforms. It implements LC duplex optical connectivity for simultaneous transmit and receive paths and supports Digital Diagnostics Monitoring (DDM/DOM) in accordance with SFF-8472 for real-time monitoring of supply voltage, laser bias current, transmit power, receive power and temperature. The compact metal housing ensures mechanical robustness and predictable thermal behavior during continuous operation.

Suitable for

Key specifications

How to use

Install the transceiver into an SFP+ slot on compatible network equipment until it seats firmly and the latch engages. Connect LC duplex single-mode patch cords to the module, ensuring correct transmit/receive orientation. Verify device compatibility with the host platform's supported optics list and enable any required firmware or software settings for third-party modules. Monitor the link and optical parameters via the equipment management interface or the transceiver's DDM/DOM readings to confirm correct operation.

Recommendations

For reliable long-distance performance, use single-mode fiber and high-quality LC duplex patch cords, avoid sharp bends or tight cable bundles, and verify DDM readings during commissioning. Confirm that the host hardware supports SFP+ modules with DDM if remote diagnostics are required.