Bosch GWS 24-230 P haakse slijper 23 cm 6500 t/min 2400 W 5,9 kg

The Bosch GWS 24-230 P angle grinder is a heavy-duty professional tool designed for demanding grinding and cutting tasks. Equipped with a high-power 2400 W brushless motor, it delivers consistent torque and a maximum idle speed of 6500 RPM to handle thick metal, stone and reinforced materials. The tool accepts a 230 mm (23 cm) grinding disc mounted on an M14 spindle thread and is built with a durable housing in blue and black finish. With a robust construction and a weight of 5.9 kg, this angle grinder is intended for continuous workshop or site use where performance and reliability are required.

Advantages

The brushless 2400 W motor provides improved efficiency, reduced maintenance and a longer service life compared to brushed motors. High idle speed up to 6500 RPM enables fast material removal and clean cutting lines. The large 230 mm disc diameter increases cutting depth and grinding coverage, reducing the number of passes needed. A sturdy metal gearbox and reinforced housing contribute to overall durability, while the M14 spindle thread ensures compatibility with a wide range of industrial discs and attachments.

Suitable for

• Cutting and grinding steel, iron and metal structures
• Removing weld seams, burrs and surface imperfections
• Shaping and trimming concrete, masonry and stone
• Preparing metal surfaces for painting and coating
• Heavy-duty site and workshop applications

Key specifications

• Motor type: brushless electric motor
• Power input: 2400 W
• Maximum no-load speed: 6500 RPM
• Grinding/cutting disc diameter: 230 mm
• Spindle thread: M14
• Weight: 5.9 kg
• Colours: blue and black housing
• Dimensions (approx.): 243 mm width × 473 mm height

How to use

Before use, select an appropriate 230 mm disc for the intended material and inspect it for damage. Secure the chosen disc onto the M14 spindle following the manufacturer's tightening instructions and install the safety guard in the correct position. Hold the grinder with both hands on the main and auxiliary handles, maintain a stable stance and start the tool, allowing it to reach operating speed before contacting the workpiece. Apply steady, even pressure and move the grinder along the work surface without forcing the disc. After finishing the operation, switch off the tool and let the disc come to a complete stop before setting the grinder down or changing accessories.

Recommendations

Use appropriate personal protective equipment, including eye protection, hearing protection, gloves and respiratory protection when working with metal or masonry dust. Ensure proper ventilation when cutting or grinding materials that generate fine dust. Do not use damaged discs, and replace consumables according to wear. For prolonged or continuous heavy use, allow periodic cooling breaks to extend motor and gearbox life and follow Bosch maintenance guidance to preserve tool performance.