DVI-D Single Link kabel stekker - stekker 0,50 m ACT AK3819

The ACT DVI-D Single Link cable male - male 0.50 m AK3819 is a compact video cable designed to connect DVI-D equipped devices. With a 0.5 m length and male DVI-D connectors on both ends, it supports single-link digital video transmission up to 1920x1200 resolution. Its short form factor and black outer finish make it suitable for installations where space is limited and a reliable digital connection is required.

Advantages

The cable provides a direct digital DVI-D connection that preserves signal quality for compatible monitors and graphics sources. Its 0.5 m length reduces cable clutter in confined spaces and prevents excess cable from tangling behind desks or equipment racks. The male-to-male configuration ensures plug-and-play compatibility with standard DVI-D ports, while the black color integrates unobtrusively into most setups.

Suitable for

• Connecting a DVI-D monitor to a desktop graphics card over short distances
• Linking DVI-D enabled projectors and media players where only digital video is required
• Use in compact workstations, small offices, or home entertainment systems with limited cable space

Key specifications

• Cable length: 0.5 m
• Connector type (both ends): DVI-D male
• Supported resolution (single link): up to 1920x1200
• Color: Black
• Signal type: Single-link digital video

How to use

Ensure both devices have DVI-D ports before connecting. Align each male DVI-D connector with the corresponding port and insert gently until secure; tighten any retaining screws if present to prevent accidental disconnection. Use the 0.5 m cable where a short, direct connection is needed; avoid excessive bending at the connector ends to preserve signal integrity. If the display does not detect a signal, verify that both devices are powered on and set to the correct input source.

Recommendations

For best results, use this cable for short-distance digital video connections and avoid routing it alongside high-power electrical cables to minimize potential interference. Store the cable without sharp bends and disconnect by holding the connector housing rather than pulling the cable itself.