Filament-spoel FlashForge HS PETG 1,75 mm 1 kg Nebula paars

FlashForge HS PETG filament in 1.75 mm diameter on a 1 kg spool, Nebula Purple color, is formulated for FDM/FFF 3D printers that accept 1.75 mm filament. PETG combines the ease of printing associated with PLA and the mechanical robustness and chemical resistance closer to ABS, providing good layer adhesion, reduced warping, and reliable dimensional stability for functional and decorative parts.

Advantages

This PETG filament offers balanced mechanical properties with improved impact resistance and flexibility compared to brittle materials, while maintaining printability at common FDM temperatures. The Nebula Purple pigment delivers consistent coloration and surface finish across layers. Lower tendency to warp and good interlayer bonding reduce failed prints on a wide range of build surfaces. Chemical resistance and moisture tolerance make the material suitable for parts exposed to mild solvents or humidity.

Suitable for

• Functional prototypes and end-use parts requiring strength and dimensional stability
• Mechanical components, brackets, and housings
• Decorative prints and colored models with reliable surface finish
• Parts exposed to moderate chemical agents or humid environments
• General-purpose printing where reduced warping is beneficial

Key specifications

• Material: PETG (glycol-modified polyethylene terephthalate)
• Diameter: 1.75 mm
• Net weight: 1 kg spool
• Color: Nebula Purple
• Compatibility: FDM/FFF 3D printers supporting 1.75 mm filament
• Typical print temperature range: commonly used with heated beds and standard PETG nozzle temperatures (refer to printer settings)

How to use

Load the FlashForge HS PETG filament into a 3D printer designed for 1.75 mm filament and set nozzle and bed temperatures according to your printer manufacturer and filament recommendations. Use a clean, properly leveled build plate; a heated bed improves adhesion and reduces warping. Retract and retraction speed settings should be tuned to minimise stringing while maintaining consistent extrusion. Allow printed parts to cool gradually to retain dimensional stability and assess final mechanical properties after a short conditioning period.

Recommendations

Store the spool sealed and away from moisture when not in use. Dry the filament if moisture absorption is suspected. Begin with conservative print speeds and moderate temperatures, then adjust based on print results. Use appropriate safety measures for ventilation when printing and post-processing.