Glasvezel-transceivermodule BlueOptics SFP-6121-BO SFP+ 10000 m aluminium

The BlueOptics SFP-6121-BO SFP+ 10000 m Aluminium is a fiber optic SFP+ transceiver module designed for single-mode links up to 10,000 metres. Housed in an aluminium casing and weighing approximately 20 g, this module implements a 10GBASE-LR optical interface with LC duplex connectivity. It supports optical transmission and reception at 1310 nm and is intended for use in equipment that accepts SFP+ MSA-compliant transceivers.

Advantages

The module provides 10 Gbit/s data rate support over long-distance single-mode fibre with minimal electromagnetic interference. Its aluminium housing combines low weight with mechanical durability. The module follows industry MSA form-factor and optical interface conventions for broad compatibility and includes digital diagnostics monitoring functionality for real-time status information where supported by host hardware.

Suitable for

Key specifications

How to use

Insert the SFP+ module firmly into a compatible SFP+ port on the switch, router or host device until it latches. Connect an LC duplex single-mode patch cable to the module, ensuring correct transmit/receive orientation. Verify link status on the host device and check digital diagnostic readings if the platform supports DDM/DOM. Remove the module using the release mechanism provided by the host to avoid damage and always replace protective dust caps when the module is not in use.

Recommendations

For optimal performance use single-mode fibre rated for long-distance links and quality LC duplex patch cords. Confirm host compatibility with SFP+ 10GBASE-LR transceivers and enable DDM/DOM support in the device firmware to monitor optical parameters. Avoid bending fibre beyond recommended radii and follow ESD precautions when handling the transceiver.