Haakse slijper Metabo W 750-115

The Metabo W 750-115 angle grinder is a compact, corded grinding tool designed for general metalworking and surface-preparation tasks. Equipped with a 750 W motor and a maximum no-load speed of 11,500 RPM, this grinder accommodates a grinding disc with a diameter of 115 mm and produces a rated torque of 1.9 N⋅m. With a net weight of 1.8 kg and a two-colour housing in green and black, the tool balances performance and maneuverability for workshop and site use.

Advantages

The unit delivers consistent rotational speed for cutting, grinding and surface finishing on metals and similar materials. Its lightweight construction reduces operator fatigue during extended use and improves handling in confined spaces. The compact disc size enables precision work and easier access to narrow areas while still offering adequate removal rates. The corded AC power design ensures continuous operation without battery changes or recharge interruptions.

Suitable for

• Cutting and grinding steel, iron and non-ferrous metals
• Removing rust, scale and old paint from metal surfaces
• Deburring edges and cleaning welded joints
• Shaping and finishing small metal parts and fittings

Key specifications

• Motor power: 750 W
• Maximum no-load speed: 11,500 RPM
• Grinding disc diameter: 115 mm
• Rated torque: 1.9 N⋅m
• Weight: 1.8 kg
• Power source: AC mains (corded)
• Colour: green and black housing

How to use

Before operation, secure a compatible 115 mm grinding or cutting disc and confirm the disc is undamaged. Connect the tool to a properly rated AC outlet and hold the grinder with both hands—one on the main body and one on the auxiliary handle if fitted—for stable control. Start the tool and allow it to reach full speed before applying it to the workpiece. Use steady, moderate pressure; avoid forcing the disc into the material. After completing the task, switch off the tool and wait for the disc to stop completely before setting the grinder down or changing accessories.

Recommendations

Use protective equipment such as eye protection, hearing protection and gloves. Select discs appropriate for the material and the intended operation (cutting, grinding, sanding). Ensure proper ventilation when working with coatings or rust and maintain secure clamping of the workpiece. Regularly inspect and replace worn discs and follow local electrical safety rules for corded power tools.