helos glasvezel OS2-patchkabel Uniboot LC/LC duplex 9/125 µm, LSZH, 2,0 mm, geel, 7,5 m (373368)

The Helos LWL Patch Cable Uniboot LC/LC Duplex 9/125µm OS2 7.50m in black is an optical patch cable designed for single-mode fiber connections where reliable high-speed data transmission is required. The duplex uniboot construction provides two fibers in a compact jacket with LC/LC duplex connectors on each end. With a 9/125µm core/cladding ratio and OS2 single-mode fiber specification, the cable is suitable for long-distance and low-loss links in structured cabling and network backbone environments.

Advantages

This uniboot patch cable reduces cable bulk and simplifies cable management thanks to its combined duplex jacket and slim LC connectors. The OS2 single-mode fiber offers low attenuation and stable signal performance for long-reach applications. The 7.50 m length provides flexible placement between racks, panels, or equipment, while the durable outer jacket and precision-terminated LC ferrules ensure consistent contact and mechanical resistance.

Suitable for

• Interconnecting switches, patch panels and optical transceivers in data centers
• Fiber-to-the-desk or fiber-to-the-cabinet installations in enterprise networks
• Backbone links and long-distance single-mode connections
• High-density racks and structured cabling environments requiring compact duplex cabling

Key specifications

• Fiber type: single-mode OS2 (9/125 µm)
• Connector type: LC to LC duplex, uniboot design
• Length: 7.50 meters
• Colour: black
• Jacket: compact duplex uniboot jacket for reduced cable diameter
• Application: single-mode optical links for long-reach transmission

How to use

Route the Helos uniboot LC/LC duplex cable between the two connection points, taking care to maintain the minimum bend radius specified for single-mode fiber to avoid increased attenuation. Insert the LC connectors into the corresponding LC ports on patch panels, transceivers or equipment until they click into place. Verify correct polarity for duplex links and secure excess cable length to cable management panels or ties to prevent strain on the connectors.

Recommendations

Handle fiber connectors by the boot and housing, avoid touching the ferrule end face, and use dust caps when connectors are not in use. Inspect and clean LC end faces with appropriate fiber cleaning tools before mating. Avoid tight bends and mechanical stress; store and route the cable according to standard single-mode fiber installation practices to maintain signal integrity.