Netwerkkabel BlueOptics Simplex LWL patchkabel LC-UPC/LC-APC singlemode 7,5 meter blauw

The BlueOptics Simplex LWL Patch Cable LC-UPC/LC-APC Singlemode 7.5 Meter Blue is a singlemode fiber patch cord designed for point-to-point optical connections in network and telecom environments. It combines an LC-UPC connector on one end and an LC-APC connector on the other to support low-loss, return-loss-optimized connections where different connector polarisations or mating types are required. The 7.5 m length and distinctive blue jacket enable practical cable routing and visual identification in racks, cabinets and patch panels while maintaining singlemode transmission characteristics suitable for long-reach links.

Advantages

This singlemode simplex patch cable provides low insertion loss and high return loss owing to the LC-UPC to LC-APC mating, which helps maintain signal integrity across the link. The fixed 7.5 m length reduces slack management issues and simplifies planning for intermediate connections. The blue outer jacket improves traceability in multi-cable installations, and the cable's construction is intended for reliable performance in standard indoor networking environments.

Suitable for

Key specifications

How to use

Select appropriate fiber ports that match the LC-UPC and LC-APC terminations and ensure devices are powered off or transmission disabled if live insertion is not recommended by your equipment vendor. Route the 7.5 m cable through cable managers or tie points to avoid tight bends; maintain minimum bend radius specified by the fiber manufacturer. Connect the LC-UPC end to the corresponding UPC receptacle and the LC-APC end to the APC receptacle, taking care to align ferrules cleanly. Use a fiber inspection scope and, if required, an optical power meter to verify connection quality after installation.

Recommendations

Clean connector endfaces before mating and avoid touching ferrules. Do not exceed recommended bend radius and protect the cable from crushing or sharp edges. Use this LC-UPC to LC-APC singlemode patch cable where a UPC-to-APC connection is required; confirm connector compatibility with active devices to ensure optimal return loss and performance.