SATA-kabel DeLOCK 83976 0,1 m 7-pins zwart rood

The DeLOCK 83976 SATA cable is a 0.1 m internal connection cable with two 7-pin SATA connectors designed for reliable data transfer between SATA devices such as HDDs, SSDs, controller cards or flash memories. The cable supports the SATA III standard with transfer rates up to 6 Gb/s and is downward compatible with earlier SATA versions. Its short length and compact profile make it suitable for tight spaces inside PCs and servers; when connected to a hard drive the cable is routed downwards. The connectors feature metal clips for a secure, audible click when plugged in.

Advantages

Supports data transfer rates up to 6 Gb/s and is backward compatible with previous SATA versions. Compact 0.1 m length reduces cable clutter in confined enclosures. Metal-clip connectors provide a reliable mechanical connection. Two standard 7-pin SATA connectors ensure compatibility with common internal drives and controller cards. Black and red color scheme for easy visual identification.

Suitable for

• Connecting 2.5" or 3.5" HDDs and SSDs inside PCs
• Internal connections to SATA controller cards
• Tight or compact PC and server builds
• Replacing or upgrading short internal SATA cables

Key specifications

• Cable length: 0.1 m
• Connectors: SATA 7-pin to SATA 7-pin
• Supported standard: SATA III (up to 6 Gb/s), backward compatible
• Product colour: Black, Red
• MPN: 83976
• EAN: 4043619839766

How to use

Align each 7-pin SATA connector with the corresponding SATA port on the drive or controller and push until the metal clip clicks into place. Route the 0.1 m cable along the desired path inside the chassis; when connecting to a hard drive the cable will typically be led downwards. To disconnect, depress the metal clip and pull the connector straight out to avoid bending pins or damaging the port. Ensure devices are powered off before connecting or disconnecting the cable.

Recommendations

Use this short SATA cable for internal, short-distance connections where a compact cable is required. Avoid sharp bends or excessive tension on the cable and keep it away from moving parts and heat sources. For full SATA III performance, connect both devices to SATA III ports; if used with older SATA ports, transfer speeds will be limited to the older standard.