Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm

SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
74,40 €
The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is... Lees meer
Voorraad 20 Code 1485840 Merk BLUEOPTICS Model TRPEG1EEXC000E2G-BO Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum maandag, oktober 26
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is designed to fit standard SFP ports using an LC duplex optical interface. The transceiver supports link reach up to 40,000 m over appropriate single‑mode fiber.

Advantages

The module follows MSA‑compatible SFP form‑factor standards to ensure mechanical and electrical interoperability with compatible network equipment. A compact metal enclosure provides mechanical protection and thermal stability. With support for 1310 nm optical transmission and a rated maximum distance of 40 km, the transceiver is suitable for long‑reach Ethernet and related optical protocols. Low weight and a standard 3.3 V interface simplify installation and replacement in switches, routers and media converters.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures recommended by your hardware vendor before inserting the SFP module into an SFP cage. Insert the transceiver into an empty SFP slot until it latches, then connect LC duplex patch cords to the transmit and receive ports, observing correct fiber polarity. Configure the host device for the intended optical link speed and protocol (up to 1250 Mbit/s) and verify link status through the device management interface. If the host supports digital diagnostic monitoring (DDM/DOM), enable or query the DDM functions to read real‑time parameters where available.

Recommendations

Use single‑mode LC duplex fiber and compatible patch cords for best range and signal quality. Verify compatibility with the target switch or router model and ensure the host firmware accepts third‑party SFP modules if required. Keep optical connectors clean and capped when not in use; follow ESD precautions when handling the transceiver.

Belangrijkste kenmerken
  • Single‑mode fiber links up to 40 km (1000BASE‑LH style applications)
  • Gigabit Ethernet and other 1.25 Gbit/s optical interfaces
  • Installation in switches, routers, media converters and compatible SFP slots
  • Point‑to‑point backbone connections and campus interconnects
  • Maximum data rate: 1250 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 40,000 m (40 km) over single‑mode fiber
  • Optical connector type: LC duplex (SFP form factor)
  • Supply voltage: 3.3 V
  • Product colour / finish: silver metal housing
  • Weight: approx. 0.02 kg
Specificaties
Aantal meegeleverde producten
1 pc(s)
Bedrijfstemperatuur (T-T)
0 - 70
Duplexsysteem
Full
Gewicht
0.02 kg
Gewicht verpakking
30 g
Glasvezel-ethernetbekabelingstechnologie
1000BASE
Glasvezelconnector
SFP
Golflengte
1310 nm
Ingangsspanning
3.3
Interfacetype
SFP
Materiaal behuizing
Metal
Maximale bedrijfstemperatuur
70 °C
Maximale overdrachtsafstand
40000 m
Maximale overdrachtssnelheid
1250 Mbit/s
Opslagtemperatuur (T-T)
0 - 90
Productkleur
Silver
Rx-golflengte (max.)
1310 nm
SFP-transceiverstandaard
LH
Tx-golflengte (max.)
1310 nm
Type SFP-transceiver
Fiber optic
Prijsverloop van de afgelopen 6 maanden
SFP-transceiver BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Actueel
74,40 €
Laagste
71,86 €
Hoogste
76,85 €
Wijziging 24 uur
+1,01 €   +1%
Week
+0,89 €   +1%
Maand
+0,36 €   +0%

Populaire producten in deze categorie

Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.