ACT netkabel stekker CEE 7/7 (haaks) - C13 groen 1,2 m

The ACT Power cord CEE 7/7 male angled AK5137 is a 1.2 m mains cable with a CEE 7/7 plug and an IEC60320 C13 coupler, designed for 230 V input. The angled CEE 7/7 connector helps save space behind equipment and the 1.2 m length balances reach and cable management. The cable is produced by ACT and comes in green colour for easy identification.

Advantages

The angled CEE 7/7 plug reduces strain on wall sockets and allows connections in confined spaces. The IEC C13 coupler is compatible with a wide range of IT and consumer devices that accept C13 inlets. At 1.2 m length the cable offers practical flexibility without excessive slack, and the green colour simplifies cable routing and visual identification in installations.

Suitable for

• Desktop PCs and workstations with C13 inlets
• Monitors, printers and peripheral equipment using C13 connectors
• Office or home setups where an angled mains plug is needed to fit tight spaces

Key specifications

• Manufacturer: ACT
• Model / MPN: AK5137
• Connector 1: CEE 7/7 male (angled)
• Connector 2: IEC60320 C13 coupler
• Cable length: 1.2 m
• Rated input voltage: 230 V
• Product colour: Green
• Category: Power cables

How to use

Insert the angled CEE 7/7 plug into a compatible 230 V wall socket or power strip, then connect the IEC C13 coupler to the device’s C13 inlet. Ensure both connectors are fully seated and the cable is routed to avoid sharp bends or compression. Disconnect by pulling the plug, not the cable, to avoid damaging the conductors or connectors.

Recommendations

Use this power cord indoors in dry environments only. Verify the device accepts a C13 inlet and that the wall socket is compatible with a CEE 7/7 plug. Do not exceed the device’s rated current and inspect the cable regularly for signs of wear or damage.