ACT purper 0,5 meter U/UTP CAT6A patchkabel met RJ45-stekkers

ACT Purple 0.5m U/UTP CAT6A patch cable features full copper conductors and meets ANSI/TIA568-C2-1 performance requirements. With gold-plated RJ45 connectors and U/UTP construction, the cable is designed for high-speed data transmission and reduced external interference. The purple 0.5 m cable is suitable for structured copper networks and supports PoE applications when full copper conductors are required. Compatible with CPR Euroclass: Eca.

Advantages

The cable uses full copper conductors for reliable signal transmission and long-term stability. Gold-plated RJ45 connectors provide consistent contact and lower contact resistance. Compliance with ANSI/TIA568-C2-1 and CPR Euroclass Eca ensures the cable meets recognized industry performance and fire-safety classifications. U/UTP construction helps minimise electromagnetic interference in typical office and home environments.

Suitable for

• Connecting switches, patch panels and network devices over short distances (0.5 m)
• High-speed Ethernet links up to CAT6A performance levels
• Power over Ethernet (PoE) installations requiring full copper conductors

Key specifications

• Manufacturer: ACT
• Model / MPN: IB6600
• EAN: 8716065285659
• Cable length: 0.5 m
• Category: CAT6A, U/UTP
• Connectors: RJ-45 to RJ-45, gold-plated
• Cabling technology: 10/100/1000Base-T(X)
• Product colour: Purple
• Conductor: Full copper
• Standards: ANSI/TIA568-C2-1; CPR Euroclass: Eca

How to use

Plug one RJ45 connector into a network switch, patch panel or network device and the other end into the corresponding device or port. Ensure connectors are fully inserted until the latch clicks. Route the 0.5 m cable without tight bends or sharp kinks to preserve conductor integrity and connector alignment. For PoE devices, verify that both the switch or injector and the powered device support the required PoE class before powering the link.

Recommendations

Use this 0.5 m CAT6A U/UTP patch cable for short interconnects inside racks or between adjacent devices. Avoid running the cable alongside high-voltage mains wiring to reduce potential interference. Replace the cable if the jacket, connectors or latch show visible damage.