Coaxkabel MikroTik Flex-guide 0,5 m RPSMA

The MikroTik Flex-guide coaxial cable is a 0.5 m RPSMA patch cable designed for low loss signal transmission in both indoor and outdoor installations. Its compact 4.2 mm diameter construction and high-quality materials provide improved matching and reduced attenuation for connecting devices with RPSMA ports.

Advantages

This 50 cm Flex-guide cable features a silver-plated copper inner conductor and soldered RPSMA connectors on both ends to ensure consistent electrical contact and minimal signal degradation. The cable’s design emphasizes low insertion loss and reliable performance when used with devices such as the MikroTik BaseBox and most antennas with RPSMA interfaces.

Suitable for

• Connecting routers and wireless devices with RPSMA connectors
• Linking external antennas to radio units
• Short indoor or sheltered outdoor antenna runs

Key specifications

• Length: 0.5 m
• Connector type: RPSMA male to RPSMA male (soldered)
• Inner conductor: silver-plated copper
• Diameter (W×H): 4.2 mm
• Brand: MikroTik
• MPN: 10084
• EAN: 5711783892342

How to use

Align and carefully screw the RPSMA connectors to the corresponding RPSMA ports on your devices; do not overtighten. Ensure connectors are clean and dry before installation. Route the cable to avoid sharp bends and excessive tension that could damage the inner conductor or degrade performance.

Recommendations

For best results, use this Flex-guide cable for short connections up to 0.5 m where low loss and good impedance matching are required. Avoid prolonged exposure of connectors to unprotected outdoor conditions; consider additional sealing or a weatherproof boot if used in exposed installations.