Glasvezelkabel BlueOptics SFP2222BU1MK SC SC OS2 1 m geel

The BlueOptics SFP2222BU1MK is a 1 m single-mode fibre optic patch cord with SC/UPC connectors at both ends. Designed for OS2 / G.657.A1 type fibre with a 9 µm core (E9/125 µm), this yellow patch cord provides low attenuation and stable optical performance for long-distance links and interconnection of transceivers, patch panels or fibre distribution frames. The cable is sheathed in a flame-retardant LSZH jacket to limit smoke and halogen emissions in case of fire.

Advantages

This SC‑SC simplex patch cord offers low insertion loss and high return loss suitable for 1310 nm and 1550 nm transmission windows. Components from established manufacturers and a zirconia ceramic ferrule ensure reliable mating performance and long lifecycle up to specified mating cycles. The cable is factory‑tested with interferometer and OTDR measurements and shipped with a measurement protocol documenting insertion loss and return loss values. The LSZH jacket and compliance with common industry standards reduce fire risk and support installations in commercial and industrial environments.

Suitable for

Key specifications

How to use

Identify the SC ports on your transceivers, patch panels or fibre equipment and insert the SC connectors until they click into place. Observe careful cable routing to avoid sharp bends and maintain the minimum bend radius recommended for single‑mode fibre. When disconnecting, release the connector latch and withdraw straight out to avoid damaging the ferrule. Keep protective dust caps on connectors when not in use and refer to the provided measurement protocol to verify expected insertion and return loss values.

Recommendations

For best performance, install the BlueOptics SFP2222BU1MK in controlled indoor environments, avoid tight bends or crushing forces, and use proper strain relief at patch panels. Use compatible SC/UPC ports and consider testing links after installation with an OTDR or power meter to confirm attenuation and connector quality.