Netwerkkabel EFB Elektronik K8096.7,5 RJ-45 Cat5e 7,5 m rood

The EFB Elektronik K8096.7,5 is a 7.5 m Cat5e networking cable in red designed for Gigabit Ethernet connections. It uses U/UTP construction with four twisted pairs (AWG24/7) in a PVC sheath and terminates in two moulded RJ-45 plugs compliant with IEC 60603-7. The cable is flame retardant to IEC 60332-1 and follows TIA/EIA-568B wiring.

Advantages

This Cat5e cable supports 10/100/1000Base-T(X) data rates and provides reliable signal transmission for typical network applications. The moulded strain relief on the RJ-45 plugs reduces stress at the connector ends while the copper-plated contacts ensure good conductivity. The red jacket improves visibility for easy identification in patch panels and cable runs.

Suitable for

• Connecting computers, switches and routers in LANs
• Patch panel to switch or wall outlet connections
• Office and home network installations requiring Cat5e/U/UTP cabling

Key specifications

• Cable length: 7.5 m
• Standard: Cat5e
• Construction: U/UTP, 4 × 2 × AWG24/7, PVC, Ø = 5.4 mm
• Connectors: 2 × RJ-45, IEC 60603-7
• Flame retardant: IEC 60332-1
• Wiring: TIA/EIA-568B coded
• Data rates: 10/100/1000Base-T(X)
• Colour: Red

How to use

Route the cable between network devices, insert each RJ-45 plug into the corresponding Ethernet port until it clicks, and ensure connectors are fully seated. Use the red colour for easy identification in structured cabling. Avoid tight bends or pinching and maintain recommended bend radius to preserve performance.

Recommendations

For best results, keep cable lengths within standard limits for Ethernet runs, avoid running parallel to high-voltage power lines to reduce interference, and secure the cable with appropriate clips or ties without compressing the jacket.