SATA-kabel DeLOCK 82470 0,2 m geel

The DeLOCK SATA cable (0.2 m, yellow) is a short internal data cable for connecting SATA devices such as HDDs, SSDs, SATA controllers and SATA flash memory. The cable is designed so that when connected to a hard drive the cable lead points upwards; metal clips on the SATA connectors provide a secure snap-in connection.

Advantages

The cable conforms to the SATA II specification and supports data transfer rates up to 3 Gbps. Its compact 0.2 m length is suitable for installations with limited space and the metal locking clips ensure reliable connector retention. The yellow colour aids identification inside the system.

Suitable for

• Connecting 2.5" and 3.5" SATA hard drives and SSDs
• Connecting SATA controllers or backplanes inside PCs and servers
• Tidy cable routing in compact cases or rack-mounted systems

Key specifications

• Standard: SATA II
• Data transfer rate: up to 3 Gbps
• Length: 0.2 m
• Colour: yellow
• Connectors: one up / one straight with metal clips

How to use

Align the keyed SATA connector with the device socket and press until the metal clip snaps into place. When connecting to a drive, the cable orientation positions the lead upwards. To remove, depress the metal clip and pull the connector straight out. Ensure both host and device are powered off before connecting or disconnecting the cable.

Recommendations

Use this 0.2 m SATA cable for short internal connections where minimal slack is required; avoid bending the cable sharply near the connectors and keep it away from sources of electromagnetic interference for stable data transfer.