Stroomverlenging Helos 262787 1,5 m 3 AC-stopcontacten binnen wit

The Helos 262787 power extension provides three Type F AC outlets on a 1.5 m white cable designed for indoor use. It accepts standard 230 V input and is rated for up to 16 A and 3500 W, enabling multiple devices to be powered from a single wall socket while keeping the setup compact and accessible. The design focuses on functional placement of outlets and a cable length suited to common household and office distances.

Advantages

The extension leads offer three grounded Type F sockets to accommodate devices with earth connections. With a 1.5 m cable length, the unit gives moderate reach without excess cable clutter. Rated for 230 V and a maximum current of 16 A, it supports combined device loads up to 3500 W. The white finish integrates unobtrusively in residential and office interiors and the indoor-only specification is appropriate for protected environments.

Suitable for

• Powering multiple small appliances in a living room or bedroom
• Connecting office equipment such as monitors, printers and desk lamps
• Temporary power distribution for entertainment systems or charging stations

Key specifications

• Cable length: 1.5 m
• Number of AC outlets: 3
• Outlet type: Type F (grounded)
• Rated input voltage: 230 V
• Maximum current: 16 A
• Maximum power: 3500 W
• Intended use: Indoor
• Colour: White

How to use

Plug the extension into a compatible 230 V wall socket and ensure the plug is fully seated. Insert device plugs into the Type F outlets, avoiding overloading by keeping the total combined power draw within the 3500 W / 16 A limit. Position the cable to prevent trip hazards and keep the strip away from heat sources, moisture and direct sunlight. Disconnect the extension from the mains before cleaning or if any damage to the cable or housing is detected.

Recommendations

Do not use the extension outdoors or in damp locations. Distribute high-power devices across separate circuits if possible, and avoid connecting equipment that draws high start-up currents simultaneously. Regularly inspect the cable and connectors for wear, and replace the unit if the insulation is damaged or the connectors become loose.