Boor Bosch SDS-plus-5 165 mm 2608585629

The Bosch SDS-plus-5 165 mm drill bit is engineered for drilling in concrete and masonry where accuracy and durability are required. With a 165 mm overall length and an SDS-plus shank, the bit provides straightforward installation into compatible rotary hammer tools and maintains secure engagement during heavy-duty work. The cutting geometry is optimized to enable fast drilling speeds and reduce wear, supporting consistent performance on reinforced and plain concrete surfaces.

Advantages

This drill bit combines a wear-resistant tip and a robust shaft construction to extend service life under repeated impact loads. The SDS-plus connection allows quick bit changes without additional tools and ensures positive locking in the chuck for efficient power transfer. Optimized flute and tip geometry reduce clogging and support steady debris removal, which helps maintain drilling speed and accuracy over longer holes.

Suitable for

Key specifications

How to use

Select a compatible rotary hammer with an SDS-plus chuck. Insert the bit fully into the chuck until it locks and verify secure engagement before starting. Use hammer drilling mode for concrete and masonry; apply steady, moderate pressure and allow the tool to perform the work without excessive force. Withdraw the bit periodically to clear dust from the hole when drilling deep or multiple holes. After use, clean the flutes and store the bit in a dry place to prevent corrosion.

Recommendations

Use personal protective equipment such as safety glasses, hearing protection, and a dust mask when drilling concrete. Match drill diameter and depth to the anchor or fastener specifications and avoid side loads that can damage the carbide tip. Replace the bit if you notice significant wear, chipping, or reduced drilling efficiency to maintain safe and effective operation.