Ethernet-kabel ProXtend CAT6 RJ-45 3m oranje

The ProXtend CAT6 U/UTP CU LSZH Ethernet Cable is a 3 m network cable designed for reliable Gigabit connections. It uses 24 AWG conductors made from 99.9% pure copper and an LSZH outer jacket to limit smoke and toxic gases in case of fire. The cable supports PoE+ and is fitted with gold-plated RJ-45 connectors for improved transmission and corrosion resistance.

Advantages

The cable construction with 24 AWG, 99.9% pure copper strands and U/UTP design reduces interference and delivers stable 10/100/1000Base-T(X) performance. The LSZH jacket reduces harmful emissions in hazardous environments, while strain relief and a snagless latch protect the connector and increase durability. 50µ"U gold-plated RJ-45 contacts offer better conductivity and longevity compared with standard metal connectors.

Suitable for

• Gigabit Ethernet connections (10/100/1000Base-T)
• PoE and PoE+ powered devices
• Office and home network installations requiring an LSZH jacket
• Patch panels, switches, routers and network ports with RJ-45

Key specifications

• Cable length: 3 m
• Conductor: 24 AWG, 99.9% pure copper (CU)
• Shielding: U/UTP (unshielded pairs, overall unshielded)
• Connector type: RJ-45 to RJ-45, 50µ"U gold plating
• Cabling technology: 10/100/1000Base-T(X)
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Product colour: Orange
• Weight: 0.133 kg
• EAN / MPN: 5714590022254 / 6UTP-03O

How to use

Connect one RJ-45 plug to your network device (switch, router, NIC) and the other plug to the corresponding port on the destination device or patch panel. Ensure connectors are fully inserted until the latch clicks. For best performance, avoid tight bends, kinks or running the cable alongside high-voltage power lines. The cable supports PoE and PoE+; verify device compatibility and power budget before use.

Recommendations

For reliable Gigabit performance maintain bend radius greater than four times the cable diameter, avoid sharp bends near the connector, and install in environments compliant with LSZH requirements when reduced smoke and halogen emissions are needed. Inspect connectors for damage before installation and replace if plating or latch are compromised.