Hypertec 314033-HY SATA-kabel 0,75 m SATA 7-pins zwart

The Hypertec ProConnectLite SATA 6Gbps cable (Hypertec 314033-HY) is a 0.75 m SATA III data cable with straight 7-pin SATA connectors on both ends and a secure straight latch. Designed for internal PC use, this black cable provides a standard SATA III interface for reliable high-speed data transfers between motherboards and storage devices.

Advantages

This SATA cable supports SATA III 6Gbps transfer rates and uses standard 7-pin connectors on both ends for broad compatibility with hard drives, SSDs and optical drives. The straight latch connector ensures a snug fit to reduce accidental disconnection, while the 0.75 m length offers flexible routing inside most PC cases. The black jacket provides a neutral appearance that fits typical system builds.

Suitable for

Key specifications

How to use

Power off the PC and disconnect mains power. Locate an available SATA port on the motherboard and a SATA power connector from the PSU for the target drive. Align the 7-pin SATA connector with the drive's SATA data socket and press firmly until the latch engages. Connect the other end to the motherboard SATA port. Reconnect power and boot the system; the connected drive should be recognised by the BIOS/OS.

Recommendations

The cable is intended for internal PC use; avoid excessive bending or strain near the connectors and route the cable to prevent interference with fans. For reliable long-term operation, ensure secure seating of both data and power connectors and replace the cable if the latch or conductors become damaged.