Ethernetkabel ProXtend CAT6 RJ-45 7m wit

The ProXtend Ethernet Cable CAT6 F/UTP CU LSZH 7m (white) is a shielded network cable designed for reliable Gigabit Ethernet connections. Constructed with 99.9% pure copper conductor strands (AWG 26) and an F/UTP foil screen, this cable reduces electromagnetic interference and supports Power over Ethernet Plus (PoE+). The outer LSZH jacket limits smoke and toxic emissions in case of fire and the RJ-45 connectors feature thick 50µ"U gold plating for improved durability and transmission quality.

Advantages

This CAT6 F/UTP cable offers stable data transmission up to 1000 Mbit/s, reinforced strain relief and a snagless latch for secure connector installation. The foil shielding provides protection against EMI, while the LSZH outer jacket enhances indoor safety. Gold-plated RJ-45 connectors increase contact reliability and can deliver higher throughput compared with standard metal-plated connectors.

Suitable for

• Wired Gigabit Ethernet connections (10/100/1000Base-T)
• Indoor network runs where low-smoke materials are required
• PoE+ devices such as IP cameras, access points and VoIP phones
• Home and office networks requiring shielded cabling to reduce interference

Key specifications

• Length: 7 m
• Cabling: CAT6 F/UTP (foil screened, unshielded pairs)
• Conductor: 99.9% pure copper, AWG 26
• Connectors: RJ-45 to RJ-45 with 50µ"U gold plating
• Data rate: up to 1000 Mbit/s (Gigabit Ethernet)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Supports: PoE+
• Colour: White

How to use

Connect one end of the cable to the RJ-45 port on your network device (router, switch or PoE injector) and the other end to the target device (PC, IP camera, access point, etc.). Ensure the connectors click into place and route the cable without tight bends; avoid kinking or excessive mechanical stress on the strain relief. For best performance, keep cable runs away from high-voltage power lines and strong EMI sources.

Recommendations

For stable Gigabit performance, use this CAT6 F/UTP cable for runs up to its specified lengths and follow standard installation practices: avoid sharp bends, secure with appropriate cable clips, and maintain separation from power cabling. When deploying PoE+ devices, verify your switch or injector supports required power levels.