Netwerk-repeater TENDA T10 2,4 GHz Wi-Fi 4, 300 Mbit/s, 2 externe antennes, 1x RJ-45, wit

The Tenda T10 is a N300 Wi‑Fi range extender that extends an existing 2.4 GHz wireless network to cover medium and large homes. It uses two external high‑gain omnidirectional antennas to improve signal reach and reduce Wi‑Fi dead zones. A built‑in Ethernet port enables wired connection or AP mode with up to 100 Mbps wired throughput. After connecting a smartphone or PC to the extender's Wi‑Fi, the configuration page opens automatically for setup.

Advantages

The Tenda T10 supports Wi‑Fi 4 (802.11n) with up to 300 Mbps on the 2.4 GHz band and is compatible with 802.11b/g devices. Two external antennas increase coverage and signal stability. An Ethernet LAN port allows wired devices or AP operation. Intelligent LED indicators simplify placement by showing signal strength and connection status. The compact white housing is easy to install in homes.

Suitable for

• Extending home Wi‑Fi coverage in medium and large apartments or houses
• Improving wireless signal for streaming and browsing on multiple devices
• Providing a wired connection for a single device via the Ethernet port
• Filling Wi‑Fi dead zones in rooms far from the main router

Key specifications

• Wi‑Fi standards: Wi‑Fi 4 (802.11n), 802.11g, 802.11b
• Wireless rate: up to 300 Mbps (2.4 GHz)
• Antennas: 2 external high‑gain omnidirectional
• Ethernet: 1 × RJ‑45 LAN port (AP/bridge/wired client modes supported)
• Indicator: Intelligent LED lights for placement and status
• Colour: White
• Dimensions (approx.): 72 × 32 × 161 mm

How to use

Plug the Tenda T10 into a mains socket between your router and the area with poor Wi‑Fi coverage. Connect a smartphone or PC to the extender's Wi‑Fi network; the setup/configuration page will open automatically. Follow the on‑screen instructions to select your existing Wi‑Fi network and enter its password to extend it. Optionally connect a wired device to the Ethernet port or switch the extender to AP mode if you prefer a wired uplink.

Recommendations

Place the extender roughly halfway between the main router and the area with weak signal, avoid metal obstructions and large appliances, and use the LED indicators to find the optimal location for best performance.