ProXtend ethernetkabel CAT6 RJ-45 10 m groen

The ProXtend Ethernet Cable CAT6 F/UTP CU LSZH, 10 m, green, is a shielded network cable designed for reliable Gigabit Ethernet connections up to 1000 Mbit/s. Constructed with 99.9% pure copper strands (AWG 26) and an F/UTP foil screen, the cable reduces electromagnetic interference and supports Power over Ethernet Plus (PoE+). The LSZH outer jacket minimizes smoke and toxic gases in case of fire, while molded strain relief and snagless latch protection improve durability and ease of installation.

Advantages

The cable combines high-quality 99.9% copper conductors and a foil shield to provide stable, low-loss data transmission. RJ-45 connectors are plated with thick 50µ"U" gold for improved contact reliability and longer connector life, which helps maintain consistent throughput. LSZH jacketing and reinforced strain relief add safety and mechanical durability for both home and office installations.

Suitable for

• Gigabit Ethernet networks (10/100/1000Base-T)
• PoE+ powered devices such as IP cameras, VoIP phones and wireless access points
• Office and residential structured cabling runs up to 10 m
• Environments where reduced smoke and halogen-free materials are required

Key specifications

• Length: 10 m
• Cabling technology: 10/100/1000Base-T(X)
• Conductor: 99.9% pure copper strands, AWG 26
• Shielding: F/UTP (foil screened pairs, overall unshielded)
• Connector type: RJ-45 to RJ-45, 50µ"U" gold plated
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Color: Green
• Supports PoE+

How to use

Connect one RJ-45 end to your network device (switch, router or wall outlet) and the other end to the target device (computer, IP camera, access point). Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends or kinks and avoid running it parallel to high-voltage power lines to reduce interference. For wall or patch panel terminations, use standard RJ-45 jacks and follow typical Ethernet wiring standards.

Recommendations

For optimal performance, keep cable runs under recommended distances for Gigabit Ethernet, avoid excessive bending radius, and use appropriate cable management. Verify that connected devices support PoE+ before relying on power delivery over the cable.